We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
MEAN WELL WDR-120-24 power supply unit 120 W Metallic
SKU
WDR-120-24
Login for pricing
In Stock:
0 available
24V, 5A, 0 ~ 5A, 120W, 120mVp-p, 24 ~ 29V, 180 ~ 550VAC, 254 ~ 780VDC
Category: Power Supply Units
| SKU | WDR-120-24 |
|---|---|
| EAN | 0608754596482 |
| Manufacturer | MEAN WELL |
| Availability | Out of Stock |
- Wide AC Input Range / 2 Phase
- Cooling by free air convection
- Built-in constant current limiting circuit
- Installable on DIN rail TS-35/7.5 or 15
- 100% full load burn-in test
- Built-in DC OK relay
- Cooling by free air convection
- Built-in constant current limiting circuit
- Installable on DIN rail TS-35/7.5 or 15
- 100% full load burn-in test
- Built-in DC OK relay
| Cooling | |
|---|---|
| Cooling type | Passive |
| Design | |
| Safety | Ul508 approved, IEC60950-1 CB approved by SIQ, design refer to GL;(meet EN60204-1) |
| Product colour | Metallic |
| Cooling type | Passive |
| Power | |
| Total power | 120 W |
| AC input voltage | 180 - 550 V |
| Voltage tolerance | 1.5% |
| AC input frequency | 47 - 63 Hz |
| Input current | 0.7 - 1.2 A |
| Power protection features | Over voltage, Overheating, Overload, Short circuit |
| Hold time | 50 ms |
| Efficiency | 91% |
| Performance | |
| Safety | Ul508 approved, IEC60950-1 CB approved by SIQ, design refer to GL;(meet EN60204-1) |
| Rise time | 70 ms |
| Mean time between failures (MTBF) | 268000 h |
| Operational conditions | |
|---|---|
| Operating temperature (T-T) | -25 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 20 - 95% |
| Storage relative humidity (H-H) | 10 - 95% |
| Safety regulation & standards | |
| Safety | Ul508 approved, IEC60950-1 CB approved by SIQ, design refer to GL;(meet EN60204-1) |
| Weight & dimensions | |
| Width | 40 mm |
| Depth | 113.5 mm |
| Height | 125.2 mm |
| Certificates | |
| Safety | Ul508 approved, IEC60950-1 CB approved by SIQ, design refer to GL;(meet EN60204-1) |
| Other features | |
| Voltage tolerance | 1.5% |
| Rise time | 70 ms |